又一款无root禁用软件的，比吧里上架的package disabler pro好看一些
**ONLY AVAILABLE FOR SAMSUNG DEVICES - NO ROOT REQUIRED**
3-DAY REFUND GUARANTEED WITH 100% MONEY BACK.
EZ Package Disabler is the best app to disable any packages on your Samsung without root. It means all the unwanted applications that come pre-installed on your phone can now be marked unavailable from running and updating. This process was previously only available for rooted devices but now can be performed on your stock Samsung in one or two simple steps.
In term of usages, this pro app let you disable all bloatware or other pre-installed packages that you don’t need. It results in a better battery life, smoother app experience and general improvement for your already awesome Samsung devices.
To assist you while disabling, we are doing an extensive research on the purposes of pre-installed packages. Their details can be read inside the app so you can quickly decide whether to block a suspect application. Since there are many Samsung devices and different carriers, your feedback is always welcome so we can have more and better descriptions.
For Gear VR lovers, you can now use your virtual reality headset with cardboard apps without launching the default Gear VR package. All you have to do is to (temporarily) disable the Gear VR service. As a result, the Gear VR app will not be auto-launched until you enable them again.
Beside unused softwares debloat and cardboard app enabler, this app can also assist your business in various ways. For instance, you can disable some tracking apps so your personal and corporate information stays secure. In addition, EZ package disabler can prevent people from using certain apps by not only making the apps impossible to run but also hide them from any launcher. It means better privacy, enhanced security and the possibility to use as a parental control app. If you have some specific needs regarding this debloater app,feel free to contact us.
**NOTE**- Please enable all packages, even apps that you consider bloat ware before a system update.- The easy way to uninstall this debloat software is to open the app, tap on the hamburger button at the top left corner and tap on “Uninstall this app”.- If you still have problems with uninstalling, try deactivate admin access of this debloater app by going to “SETTINGS” -& “SECURITY” -& DEVICE ADMINISTRATOR -& Disable admin access for “EZ Package Disabler”.- It is advised to backup your devices before disabling packages. Unless you are sure that the disabled packages are bloat ware and will not cause any problems to the system and other non bloat apps.
**DISCLAIMER**Make sure that you understand what you are doing while disabling any packages or possible bloatware in your phones. You are recommended to backup your device data and we hold no responsibility for any damage you may cause.
If you have any problems, questions or feedback regarding EZ package disabler, please contact &ez.package.& for support.
If you can help to translate this app, please send us an email to the same email above, we might be able to give you a small gift !
For business enquiry regarding EZ Package Disabler or other related apps, please visit our website
for more information.
form>div>textarea" data-dock="left" data-placement="top">
你是谁的生活不能没有每天阅读一个真正的书呆子？你想享受您最喜爱的小说，即使最近的书店是千里之遥？只是图书阅读器是特别为您服务！它可以让你随时随地就在您的Android设备上阅读。所以，你永远不会感到厌倦这本书阅读应用：在家里，在公共汽车上或海上旅行，在农村，在队列中，医院等以这种电子书阅读器为Android随时随地与您合作！
你永远有自己的图书馆在一个钱包，你就可以补充它。如果你需要为Android免费PDF阅读器，欢迎您！
这里只是图书阅读器应用程序的主要特点：...
form>div>textarea" data-dock="left"
data-placement="top">
form').submit();">回复Finally working Nvidia Optimus in Fedora | CORETECH
› Finally working Nvidia Optimus in&Fedora
Notes: This applies to Fedora 17 & 18 with latest updates and was tested on Asus K93SV laptop with GT540M GPU (wrongly reported as GT555M by lspci in F17).
Now there is also an official page on Fedora wiki on this topic here:
1. Get latest bumblebee sources (3.0.1) from
2. Get latest bbswitch sources (0.5)
3. Install libbsd-devel, kmod-nvidia and dkms as root or with sudo if they are not already installed:
sudo yum install libbsd-devel kmod-nvidia dkms
After installing kmod-nvidia, remove /etc/X11/xorg.conf, /etc/X11/xorg.conf.d/00-nvidia.conf and /etc/modprobe.d/blacklist-nouveau to continue using nouveau driver by default.
sudo rm -f xorg.conf
sudo rm -f /etc/X11/xorg.conf.d/00-nvidia.conf
sudo rm -f /etc/modprobe.d/blacklist-nouveau.conf
I also removed “nouveau.modeset=0 rd.driver.blacklist=nouveau” kernel parameters from /etc/grub2.cfg for current kernel.
4. Compile bbswitch and install it with DKMS
From directory where you downloaded bbswitch:
tar xvzf bbswitch-0.5.tar.gz
sudo cp -Rv
bbswitch-0.5 /usr/src
sudo ln -s /usr/src/bbswitch-0.5/dkms/dkms.conf /usr/src/bbswitch-0.5/dkms.conf
sudo dkms add -m bbswitch -v 0.5
sudo dkms build -m bbswitch -v 0.5
sudo dkms install -m bbswitch -v 0.5
5. Download and install latest VirtualGL RPM from here:
sudo yum localinstall VirtualGL-2.3.1.x86_64.rpm
or install directly with yum from ‘updates-testing’ repo in Fedora 18:
sudo yum --enablerepo=updates-testing install VirtualGL
6. Compile & install bumblebee
tar xvzf bumblebee-3.0.1.tar.gz
cd bumblebee-3.0.1
./configure --prefix=/usr --sysconfdir=/etc
sudo make install
sudo cp scripts/systemd/bumblebeed.service /lib/systemd/system
Edit /lib/systemd/system/bumblebeed.service line 7 to read:
ExecStart=/usr/sbin/bumblebeed --config /etc/bumblebee/bumblebee.conf
Edit /etc/bumblebee/bumblebee.conf and change:
Driver=nvidia
and in section [driver-nvidia]:
KernelDriver=nvidia
Edit /etc/bumblebee/xorg.conf.nvidia and add the following at the begining:
Section "Files"
ModulePath
"/usr/lib64/xorg/nvidia"
ModulePath
"/usr/lib64/xorg/modules"
EndSection
and the following at the end:
Section "Screen"
Identifier "Screen1"
Device "Device1"
EndSection
Create bumblebee group and add you to the group:
sudo groupadd bumblebee
sudo usermod -a -G bumblebee $USER
Enable and start bumblebeed service:
sudo systemctl enable bumblebeed.service
sudo systemctl start bumblebeed.service
7. Nvidia modules path fix (Thanks Tomash Brechko)
This completely separates intel and nvidia stuff for main and bumblebee screens respectively. Note that it moves files originating from RPMs around, so repeating the fix will likely be required after next yum update.
sudo rm /etc/ld.so.conf.d/nvidia-lib64.conf
sudo ldconfig
sudo cp -R /usr/lib64/xorg/modules/extensions/nvidia /usr/lib64/xorg
sudo rm -rf /usr/lib64/xorg/modules/extensions/nvidia
Re-run above commands after each kernel & kmod-nvidia upgrade.
Here is the output of dmesg succesfull message:
[ ] NVRM: loading NVIDIA UNIX x86_64 Kernel Module
2 18:41:39 PDT 2012
[ ] bbswitch: disabling discrete graphics
[ ] bbswitch: Result of Optimus _DSM call:
[ ] pci .0: Refused to change power state, currently in D0
[ ] pci .0: power state changed by ACPI to D3
[ ] bbswitch: enabling discrete graphics
[ ] pci .0: power state changed by ACPI to D0
[ ] pci .0: power state changed by ACPI to D0
[ ] vgaarb: device changed decodes: PCI:.0,olddecodes=none,decodes=none:owns=none
8. Run applications on Nvidia GPU with optirun
optirun glxgears
1111 frames in 5.0 seconds = 222.122 FPS
1030 frames in 5.0 seconds = 205.921 FPS
1009 frames in 5.0 seconds = 201.757 FPS
Frame rates are on dual monitor 80 in Fedora17 with Gnome session.
Thanks to the developers of Bumblebee Project.
For speed imrovements you can use primus from. Download, extract and compile, then run:
vblank_mode=0 ./primusrun glxgears
23359 frames in 5.0 seconds =
23650 frames in 5.0 seconds =
23659 frames in 5.0 seconds =
Seems to be a big step forward. This is a replacement for VirtualGL.
Step 7 should be repeated on every kernel (and kmod-nvidia) upgrade.
Keep an eye on /etc/X11 and remove xorg.conf installed by kmod-nvidia. Also /etc/X11/xorg.conf.d/00-nvidia.conf (installed also by kmod-nvidia) should be removed.
Updated to bbswitch 0.5 and use kmod-nvidia. Step 5 is optional when using Primus. Tested on Fedora 18 and works OK.
Like this:Like Loading...
Tagged with: , , , , , , , , , , , , , , ,
January 2012
9101112131415
16171819202122
232425272829
Recent posts
Top Posts & Pages
%d bloggers like this:iOS 8 - iOS 8.1 Compatible Jailbreak Apps and Tweaks
Designed by7E使用一月 省电心得及Package Disable Pro禁用列表分享！_三星s7吧_百度贴吧
&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&签到排名：今日本吧第个签到，本吧因你更精彩，明天继续来努力！
本吧签到人数：0成为超级会员，使用一键签到本月漏签0次！成为超级会员，赠送8张补签卡连续签到：天&&累计签到：天超级会员单次开通12个月以上，赠送连续签到卡3张
关注：121,054贴子：
7E使用一月 省电心得及Package Disable Pro禁用列表分享！收藏
一楼防止吞楼！刚才发得累死 系统直接吞了 不知道什么意思！
继续　? ﹏﹏ From Samsung Galaxy(TM) S7 Edge　Based on Google Android(R) Marshmallow 6.0.1 ﹏﹏ ?
先上 电量图！
本人 后台自启开了7个，平时使用时开普通省电！打游戏时关掉！7个自启动项目为
京东，腾讯充值，微信，QQ，讯飞语音，邮箱大师，淘宝基本都是使用4G网络 单位没有wifi！其实重中之重是 Package Disable Pro的禁用列表！摸索了很久！因为如果禁用不好 会导致很多东西用不了，比如支付宝指纹验证会出问题！下面开始上 禁用表图片给大家参考！
2分钟了，你图选好没啊
补充一些禁用关联1.有的人比如喜欢系统自带的天气 就不要禁用，我是用的墨迹天气，所以系统自带的天气我禁用了2.有的朋友喜欢三星自带商店的 记得除了商店以外，三星账户也不要禁用，我就是只用三星商店的如果你也一样可以照抄我的3.FIDO UAF ASM, FIDO UAF Client
2个协议是安全类协议支付宝指纹验证必须使用，不要禁用！我的这一套 保留了侧屏，及很多常用软件，所有软件正常使用重启无任何问题，支付宝指纹支付正常使用，SamSung PAY 正常使用！其他有什么问题的 可以单独M我
禁用这么多那买这个手机干嘛用
保持关注一下
收藏了 别删帖
相册里面时间没有照片了
楼主超级省电模式正常吗？
楼主这个用的是软件还是导入列表
楼主发个Package软件给我OK？
为什么发原图
还是模糊了
楼主在吗 可以把你的xml列表发给我么
你比我禁用了多一倍得程序……
亮屏几个小时。
请问为什么我这老有个高清视屏播放器的apk？
不好意思楼主麻烦您看一下，按照您说的方式禁用了大部分程序，可是为什么禁用完了反倒比没禁用占的内存还多了？重启之后也没用，谢谢回答
不用纠结内存，这个禁用是为了省电
禁用了有什么用，是会变流畅还是省电
怎么这个软件激活不了
我想知道普通省电会影响黑屏状态的微信消息推送么？
楼主截这么多图辛苦了，感谢　?﹏﹏　楼主，老夫夜观星象，决定给你赐名:车視，你看如何？
登录百度帐号推荐应用
为兴趣而生，贴吧更懂你。或后使用快捷导航没有帐号？
只需一步，快速开始
查看: 21|回复: 21
在线时间81 小时经验值1115 最后登录注册时间帖子阅读权限80UID7093325
研究生, 积分 1115, 距离下一级还需 585 积分
TA的每日心情奋斗 09:07签到天数: 431 天[LV.9]以坛为家II
G币1345 最后登录注册时间
马上注册，结交更多机友，下载更多应用，让你轻松玩转手机。
已有帐号？　　　下载游戏和软件，请【】进入机锋市场！
韩版机耗电实在太感人了,一天两充的节奏啊.求一份韩版的Package disable 禁用列表...手机没ROOT......很多全英文或韩文的APP根本不知道能不能禁用啊,怕变砖...
在线时间21 小时经验值605 最后登录注册时间帖子阅读权限60UID850730
大学本科, 积分 605, 距离下一级还需 95 积分
TA的每日心情开心 11:11签到天数: 4 天[LV.2]偶尔看看I
G币2 最后登录注册时间
不是8890省电么
在线时间0 小时经验值47 最后登录注册时间帖子阅读权限20UID
小学生, 积分 46, 距离下一级还需 4 积分
TA的每日心情怒 12:53签到天数: 22 天[LV.4]偶尔看看III
G币123 最后登录注册时间
韩版机子为什么不root？三星pay国内又不能用。。。
在线时间0 小时经验值42 最后登录注册时间帖子阅读权限20UID3067888
小学生, 积分 42, 距离下一级还需 8 积分
TA的每日心情无聊 08:05签到天数: 10 天[LV.3]偶尔看看II
G币32 最后登录注册时间
你的已经到手了？我还在犹豫信号呢，我只用移动卡
在线时间81 小时经验值1115 最后登录注册时间帖子阅读权限80UID7093325
研究生, 积分 1115, 距离下一级还需 585 积分
TA的每日心情奋斗 09:07签到天数: 431 天[LV.9]以坛为家II
G币1345 最后登录注册时间
韩版机子为什么不root？三星pay国内又不能用。。。
7天退换期没到啊,ROOT了怎么退换..
在线时间81 小时经验值1115 最后登录注册时间帖子阅读权限80UID7093325
研究生, 积分 1115, 距离下一级还需 585 积分
TA的每日心情奋斗 09:07签到天数: 431 天[LV.9]以坛为家II
G币1345 最后登录注册时间
cryingboy 发表于
你的已经到手了？我还在犹豫信号呢，我只用移动卡
昨天到手,使用了一天(打了几通电话),家里4G及通话信号都很好.我的也是移动
在线时间0 小时经验值42 最后登录注册时间帖子阅读权限20UID3067888
小学生, 积分 42, 距离下一级还需 8 积分
TA的每日心情无聊 08:05签到天数: 10 天[LV.3]偶尔看看II
G币32 最后登录注册时间
里面有可精简列表，对照着图标来
<p id="rate_93325" onmouseover="showTip(this)" tip="很给力!&经验值 + 1
" class="mtn mbn">
在线时间0 小时经验值42 最后登录注册时间帖子阅读权限20UID3067888
小学生, 积分 42, 距离下一级还需 8 积分
TA的每日心情无聊 08:05签到天数: 10 天[LV.3]偶尔看看II
G币32 最后登录注册时间
这个也可以
在线时间66 小时经验值1431 最后登录注册时间帖子阅读权限80UID2336708
研究生, 积分 1431, 距离下一级还需 269 积分
TA的每日心情难过 19:17签到天数: 6 天[LV.2]偶尔看看I
G币1 最后登录注册时间
直接删除那些没用的韩文软件就可以了
在线时间81 小时经验值1115 最后登录注册时间帖子阅读权限80UID7093325
研究生, 积分 1115, 距离下一级还需 585 积分
TA的每日心情奋斗 09:07签到天数: 431 天[LV.9]以坛为家II
G币1345 最后登录注册时间
直接删除那些没用的韩文软件就可以了
删不了,系统自带...
Powered by