From OSx86
OS X 10.7.1 Hardware Compatibility
Hardware Components
This is a component level hardware compatibility list. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying hardware. Add which parts you have working in the categories listed below, or create a new category. Please keep alphabetical order inside the categories. The categories themselves are ordered by popularity. Please list any caveats or problems as well.
ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work.
Please add hardware into tables.
This is for 10.7.1 builds only.
For how to edit the Wiki, please see
thread. Thank you!
You're looking for an Installation guide? see
|System Configuration:
Core I3 540 3.06 @ 3.70 Ghz
8 GB 1333 Mhz (2x4GB Kingston)
XFX Geforce GT240 512Mb. DDR3 Full work
Install Method:iAtkos L1 desde DVD Booteable
Enable Graphics
Sonido: Full
Apagado y Reboot: OK
Hardware Name
Patches Used
32/64bit working with patches
Intel Core 2 Duo E4500 @ 2.20 GHz
2 GB 800 MHz CL5 DDR2 SDRAM
Intel GMA X3000
80 GB IDE HDD
200 GB SATA HDD
Samsung SATA SuperDrive
Install Method:
iAtkos L1 .dmg file restored to, started from, and installed to IDE HDD +
Components Status:
Audio Out (R/F): ok/ok
Audio In (R/F): X/X
USB (R/F): ok/ok
FireWire (R/F): ok/??
Ethernet: ok
Card Reader: ok
eSATA: ??
Shutdown and Reboot: ok
BIOS-Configuration:
JMicron controller: AHCI
ACPI Suspend Type: S3 only
Legacy USB Support: Disabled
Installer Customization:
Chameleon 2.0
JMicron IDE
VoodooHDA v2.7.3
Realtek RTL81xx
Remove AppleIntelGMAxyz, AppleIntelHDGraphics and AppleIntegratedFrameBuffer, then:
MultiBeast:
System Utilities
Chimera v1.5.4
32-Bit Apple Boot Screen
KextBeast:
and Reboot!
System Configuration:
Intel Q9400 CPU 2.66 GHz @ 3.66 GHz
8400GS (256MB) works fully with GraphicsEnabler=y
2x2GB 800 MHz Ram
Install Method: Retail Disk Image boot with , then Apple Software Update to 10.7.1
Components Status:
Audio - Built-in untested, but USB HiFis works
Ethernet - Works
Wireless b/g - Works (See patch column)
USB - All Work
SATA - All Work
IDE - Untested
E-SATA - Untested
Shutdown/Reboot work 99.9% of the time.
Add the italics text below to your boot.plist to stop an App Store verification error.
&key&EthernetBuiltIn&/key&
&string&Yes&/string&
Useful Tools
X58/ ICH10R
System Configuration:
Intel Core i7-920, 2.66 GHz
Audio works
Ethernet - works
USB - Works
Gygabyte Geforce Gt 430 1Gb DDR3 full QE/CI
Install Method: Install Mac OS X Lion.app (USB Image) and LIONIZE
X58/ICH10R
System Configuration:
Intel Core i7-950
Audio - Works (Voodoo 2.7.2)
Ethernet - works (Yukon2 kext)
USB - Works
USB 3.0 - Works
Video Card MSI GTX470 - Works (Injector)
Install Method: Unibeast (no need to disconnect drives or USBs or monitors)
BIOS Version:407; Revision: Unknown
Audio: ALC889, Voodoo 2.7.2
LAN: Marvell 88e8056 (Yukon2 kext)
SATA & IDE: Works, no patches 4TB raid on Marvell controller+hard drives on ICHR10 OK
Optical Drive: LG DVDRW (not used)
Shutdown works, haven't tried to sleep.
System Configuration:
Intel Core i5-760
EVGA GeForce 9500 GT 1GB
Install Method:
Audio - Works with VoodooHDA
Ethernet - Works with Lnx2Mac's Realtek RTL81xx driver
USB 2.0 - All Work
USB 3.0 - Untested
FireWire - Working
SATA 3 GB/s - All Work
Audio: VoodooHDA
Ethernet: Lnx2Mac's Realtek RTL81xx driver
Intel G33/ICH9R
System Configuration:
BIOS- 1001 with BlackcH boot screen mod
Intel Q6600 CPU 2.24 GHz @ 2.76 GHz
ASUS 8600GT (512MB) works fully with NVEnabler64.kext
4x2GB 800 MHz Ram
160GB sata boot HDD
500GB sata Time Machine
Install Method: Install from 8GB USB using this method , then Apple Software Update to 10.7.1( uncheck security update causes a KP) No DSDT needed
Components Status:
Audio - Built-in works with VoodooHDA 2.7.2, PKG
Ethernet - Works
USB - All Work
SATA - All Work
IDE - Works
Firewire - Not Yet
Bluetooth- Dlink DBT 122 via usb
Apple Trackpad Works-100% All Gestures Available
ShutDown, Restart, Working 100 % with EVoreboot. kext.
Dual Boot With Snow Leopard 10.6.7 100% working
All Parts Second User And Sourced From EBAY Total Cost Including AOC F22+ FULL HD monitor ?280 ($435)
BlackCH P5K VM Boot CD For Extentions / Extra For Both
Voodoo HDA 2.7.2, EVoreboot.kext, NvEnabler64.Kext by Krazabu
Chameleon v2.1 svn r1506 pkg
Useful Tools
Intel G33/ICH9R
" System Configuration "
Intel Core2Duo E GHZ
Nvidia 9500 GT 1024 MB
250 GB System HD
1 TB Time Machine and Storage
Install Method:
Audio - Works
Sata - Works
Firewire - Works
USB - Works
Video - QE/CI Works
LAN - Works
Bluetooth - Apple Bluetooth Module
Trackpad and Magic Mouse 100% working
Restart and Shutdown working 100%, Sleep need PleaseSleep.app
ALC883 patch, NVEnabler64.kext, DSDT needed
P5Q Deluxe
Intel P45 / ICH10R
Intel Core 2 Duo E7400 CPU 2,8GHz
MSI NVidia Geforce 9400GT 1024Mb
4 x 1GB 800 MHz Ram Corsair
Update from existing 10.6.8 (TonyMac?s MultiBeast)
Install Method for 10.7: TonyMac?s xMove + MultiBeast, update over my existing 10.6.8
followed TonyMac?s instructions. After installation of 10.7, deleted "Extra- Folder" from 10.6.8 completely, dsdt.aml and everything, installed new MultiBeast without any additional Kext?s.
Left only skge.kext for LAN (only the fastest Lan-Port of the two ports works) and voodooHda.kext for audio (from10.6.8) inside System/L/Extensions, deleted NV64Enabler for graphics. System runs perfect only with the two additional Kexts.
Updated to 10.7.1 .... now to 10.7.2
Shutdown and reboot work fine. Sleep does not work. Update was very easy without ruining my existing 10.6.8, with which I had been dissatisfied (better leave your System to 10.6.7)
skge.kext, voodooHda.kext, no dsdt
forgot to mention that I changed the BIOS long time ago with p5q-asus-deluxe-2201-mac-dsdt.rom update1/2012: changed BIOS again to the newest original ASUS-Bios - ok
P5Q Deluxe
Intel P45 / ICH10R
Intel Core 2 Duo Q6600 CPU 2,4GHz
Club3D nVidia Geforce 9800GT 512MB
USRobotics AirforceOne USR5411 (Broadcom BCM4318)
2 x 2GB 800 MHz Kingmax, 2 x 2GB 1066MHz G.Skill
Installed iAtkos 10.6.3
10.6.6 Combo Update
followed TonyMac?s instructions (xMove + Multibeast (only DSDT + Chimera).
Updated to 10.7.1
Even the sleep works (didn't work in Snow Leopard).
For Snow Leopard
default iAtkos
Intel SATA
Universal Voodoo HDA for sound
P7H55D - M EVO
System Configuration:
CPU: Intel Core i3
GPU: Nvidia 9500GT 1GB(Out of Box)
RAM: 2x2GB DDR3 Corsair 1600Mhz
HDD: Seagate SATA (AHCI mode)
Keyboard: USB
Mouse: Magic Mouse
Dual Monitors using VGA and DVI from Single Video Card
Component Status:
I used tonymac method to install the Lion (Snow Leopard working + xmove). Downloading 10.7.1 from Mac App Store did not present any issues.
Chimera (from MultiBeast) + arch=x86_64
VoodooHDA from Multibeast. Edit .plist for Voodoo to reduce gain at boot.
System Configuration:
CPU: Intel Core i5 760 @ 4.0GHz
Video: Palit Geforce GTX 460 1GB
LAN: Onboard
Sound: Onboard
Storage: H55 SATA
Keyboard: Logitech K120
Mouse: Razer Imperator
Bootloader: Chimera 1.6
Install Method: iAtkos L1
GraphicsEnabler=Yes
Realtek RTL81XX
ALC887/ALC888b
Sleep Enabler 10.7.1
P8H61M-LE B3
Intel H61 (B3)
System Configuration:
CPU: Intel Core i3 2100 @ 3.1GHz
Video: Intel HD Graphics 2000
LAN: Onboard
Sound: Onboard
Storage: H61(B3) SATA
Keyboard: Logitech Wireless MK300
Mouse: Logitech Wireless MK300
Bootloader: Chameleon 2.0
Install Method: iAtkos L1
GraphicsEnabler=Yes
Built-in Ethernet
Sata/ide: AHCI SATA other
P8H67-M Pro
Intel H67 B3.0 Revision
System Configuration:
CPU: Intel Core i5-GHz Quad Core
GPU: Nividia GeForce 8600 GTS 256MB VRAM
RAM: AVEXIR DDR3-1333 2GB X3
LAN: Onboard
Sound: Onboard
Keyboard: COMPAQ Wired PS/2
Mouse: Razer Naga MMOG Wired USB
Install Method:
Downloaded iAtkos_L1.dmg
Burned iAtkos_L1.dmg to 4.7GB DVD+RW using Transmac on Windows 7
System Status:
Audio(2.1 8-Channel),Graphics(Multiple Monitors),LAN,Keyboard,Mouse 100% Functional and Correctly Identified
BIOS Configuration:
DVD Boot Priority
Installation Patches:
GraphicsEnabler=Yes
Built-in Ethernet
Sata/ide: AHCI SATA other
MultiBeast - Lion Edition:
EasyBeast Install
System Utilities
Kext for Non-DSDT HDAEnabler ALC892
Kext for USB 3.0 - NEC/Renesas and Etron
Kext for PS/2 Keyboard/Mice
and Trackpads
Kext for Realtek Gigabit Ethernet 2.0.6 for 10.7
System Configuration:
CPU: Intel Core i5 2400 @ 3.1GHz
RAM: 2x4GB DDR3 G.SKILL CL9 RipjawsX
Keyboard: USB
Mouse: Logitech MX518
Components Status:
All works,sleep, wakeup, shutdown, restart, USB3.0 not tested
Kexts for Lan ( Realtek Gigabit Ethernet 2.0.6 for 10.7 ), Sound ( ALC8xx HDA ) and 3rdParty Driver installed with Multibeast Lion edition
DSDT and SSDT
Patched AICPUPM.kext for Speedstep from InsanelyMac
Hardware Name
Patches Used
32/64bit working perfect
Intel Core i7 860 @ 2.80ghz
NVIDIA 9800GTX+ 512 MB
4GB RAM DDR3 1066Mhz
Install method - iBoot + Snow Leopard USB
Update to 10.7.0 from tonymac's method. 10.7.1 from software update.
Audio - Works
Video - Works
Ethernet - Realtek kext from multibeast.
Sleep/Wakeup - Not working (No sleepenabler though, havent tried.)
Shutdown/restart - Works OOB
Audio - VoodooHDA
Video - Kext from multibeast
Hardware Name
Patches Used
32/64bit working with patches
Pentium DC E5200 OC'd @ 3.2 GHz
Flashed ECS G31T-M (see 10.5.6 HCL)
My method of install was Niresh12495-Lion, Google it. After I gathered everything necessary for the install, I restored the Niresh image (Its untouched, maybe slight modifications to the install disk, but everything for the most part is pure Lion and Vanilla, there are no kexts or anything included with the install)
to a restore partition I created, and used the tools that came with it all to make it bootable. TIP: The boot loader theme it comes with is really nice, but Niresh added a picture of himself to selection screen, so after you make the drive bootable you'll want to go into the /Extra/Themes folder of the Restore drive you just created and change the "background.png" with something you like. I personally got an un-modified version of the one that Niresh put his picture on.
Continuing on, my GPU (An HIS Radeon 4670) which is another really-uncompatible piece (Just my luck) works perfectly with Snow Leopard after updating to 10.6.8, but in Lion it requires a DVI to VGA plugged into the DVI slot and then just Plug your Monitor's VGA into the VGA slot on your card (not the DVI to VGA). At least it gets Full QE/CI!
Ethernet, unlike snow leopard, does NOT work out of the box and neither does sound. But Luckily, Realtek has released kexts for mac. You'll want the OS X drivers for
just scroll all the way down until you see their OS X download Links. For sound you need ALC662 which can be Downloaded , they're for GA-945GCM-S2L (It will still work for our ECS G31T-M) Double-Click and Install "Azalia 12.0.5" Only.
After Installing the Ethernet drivers, AppStore still won't work, It returns an error that computer or device is not "valid". To fix this I followed someones pretty quick, simple guid. Here's the
Lastly but definitely not least, It updates through software update with NO problem like a real mac!! Just a note from previous experiences, If you ever do update and can't get back in (no screen, or garbled) then try getting in with safe mode (-x at boot) as something may have gone wrong with your GPU kexts from the update. Hope this works for you! Good Luck!
System Configuration:
Intel Core i3 550 @ 3.20 GHz
Nvidia 9800gt ECS edition works fully with NvEnabler
3x4GB=12Gb 1333 MHz Ram
Install Method: Retail USB Disk Image Lion 10.7 + update 10.7.1
Audio - ACL662 Works!
Ethernet - intel82578 Gigabit LAN Controller Works!
USB - All Work
SATA - All Work
IDE - No Support
E-SATA - Untested
Shutdown/Reboot work 100% of the time.
Non used DSDT.
Audio(voodooHDA),LAN & Graphics (NvEnabler)
Chameleon VS .html ]
Hardware Name
Patches Used
32/64bit working with patches
Intel P35/ICH9
BIOS updated : 6B3F1P43
Intel Core 2 Duo EGHz
NVIDIA GTX275 896MB DDR3
4GB RAM DDR2 1066Mhz
Install method - Installed from 8GB thumb drive
Update to 10.7.1 by using Software Update
Audio - Works
Video - Works
Ethernet - Works OoB
Sleep/Wakeup - Works
Shutdown/restart - Works
Ethernet - works Oob but EFI string implementation is necessary for proper App Store functionality
I've had no further problems and I did not need to reapply previously applied patches.
BIOS updated : A48F1016
Intel Core i7 GHz
Intel 510 Series SSDSC2MH250A2K5
ASUS EN210 SILENT/DI/512MD3(LP) (GeForce GT210 512MB)
Kingston KVR/4G (DDR3 PC3-10600 4GB) x 4
Bootloader: Chameleon-2.1svn-r1518 with GraphicsEnabler=Yes, GenerateCstates=Yes, GeneratePstates=Yes, No Kernel Flags
Update to 10.7.1 by using Software Update
Audio - Not Working
Video - Works (VGA / DVI / HDMI)
Ethernet - Works with official driver version 2.0.6 from
Sleep/Wakeup - Not Working
Shutdown/restart - Works
eSATA - Not Working
USB3.0 - Not Working
Extra Lion DP4.pkg
Intel G41/ICH7
Install method: iATKOS L1 Updated BIOS first, disabled legacy USB support
Foxconn G41MXE-V LGA 775 Intel G41 Micro ATX Intel Motherboard
Intel Celeron E3400 Wolfdale 2.6GHz 1MB L2 Cache
EVGA GeForce 8600 GTS 512MB
All defaults in configuration except I selected realtek ethernet drivers, nvenabler
Sleep not working OOB, it seems.
Don't care to try to fix it
Shutdown/restart working
Audio working
Good picture over DVI on my 1080p monitor + second monitor
Running synergy client so I can use my keyboard/mouse from my main windows box.
Highly recommended - just move mouse across to mac screen.
Double click broken in use stable.
NVEnabler, realtek kext in iAtkos L1
Hardware Name
Patches Used
32/64bit working with patches
GA-H55-USB3 v2.0
Install method Kakewalk 4.0 for Gigabyte Motherboards + Snow leopard 10.6 retail dvd + combo update 10.6.8 and Multibeast
easybeast + xMove + 10.7 ( lion ) update
Intel Core i3-540
Memory: 12 GB (2x2GB and 2x4GB) Kingston DDR3 RAM
VGA: Apple OEM nVidia 7300 GT Pulled from Mac Pro
Audio : Full working with applehdaudio rollback
Network Full working
Graphic Full working
USB3 working with MultiBeast installed drivers
Gigabyte SATA3 working fine
GA-X58A UD7 Rev.2
X58/ICH10R
Install method Kakewalk 4.0 for Gigabyte Motherboards + Snow leopard 10.6 retail dvd + combo update 10.6.8 and Multibeast
easybeast + xMove + 10.7 ( lion ) update
Intel Core i7920 (D0) @ 3.50
Memory: 6 GB (3x2GB) Corsair XMSII DDR3 RAM
VGA: Sapphire Radeon HD Mb DDR5 PCI-E working out of box
Audio : Full working with applehdaudio rollback
Network Full working
Graphic Full working with QE/CI
USB3 working with lacie USB3 drivers
Gigabyte SATA3 working fine
Installation method as described
GA-G41M-Combo F3
BIOS updated : September, 06 2010
Intel Core 2 Duo 2.7 Ghz
Memory : 2GB of Ram - 1333 Mhz (DDR3)
VGA : nVidia Geforce 8400 GS 512 MB
Monitor : Hp w1707 with connect by DVI Cable
Hard Disk : Seagate 1TB
Installed 10.7 Final on Mac App Store by Hackboot v6.2 CD
Use hackboot v6.2 to boot EFI first and then install by tut split my HD with new partition (10GB) to restore install InstallESD.dmg on that disk to install.
Bootloader - Chameleon 2.0 RC5 r1191 [VS] (Tested on July 20, 2011)
DSDT created by DSDT autopacher and it's so amazing :)
Audio - Voodoo HDA 0.2.62 (x86_64) driver Modded to link from Speaker to PCM with Volume Control worked perfectly.
Video - nVidia Geforce 8400 GS 512 MB (works with nVEnabler64.kext)
SATA - AHCI in BIOS (Set up default on BIOS)
Ethernet - AtherosL1Cthernet.kext (the below link it's lastest version to fix any random kernel Panic).
Sleep & Wakeup : Works perfectly, no need to install SleepEnable.kext !
Here all my file with GA-G41M-Combo for Lion:
(Found on a haft of day to take full files)
Default Lion will be using 64 bit kernel
G31M-ES2L Rev2.4
Installed Lion Final 11A494
CPU: Intel Core2 Quad Q GHz
GPU: XfX Nvidia GTS250 512MB "OK"
iGPU: GMA 3100 "Not working"
RAM: 2x2GB Kingston DDR2 800MHz "Ok"
NETWORK: Atheros L1 Lan, Working with AtherosL1Ethernet.Kext
AUDIO: Working with DSDT patch and Legacy HDA
Sleep Works ! Booting with Chameleon 2.0 RC5 775r
DSDT, AtherosL1Ethernet.Kext, Legacy 10.6.2 HDA, Graphics Enabler =yes
Installed Lion Final GM
CPU: Intel Core2 Conroe 2.66GHz
GPU: XfX Nvidia 8800GTX 768MB "OK"
RAM: 2x4GB G.Skill DDR2 800MHz "Ok"
AUDIO: Fully working
Graphics QE/CI working
Sleep Works
Install using xB note com.apple.Boot.plist must be set to values that the Lion installer recognizes, else it won't install. Also note that DSDT must be correct, else the installer will KP
Bootloader is Chimera/Chameleon 2RC5
DSDT built using Auto Patcher 0.6
Network requires AppleRT8169Ethernet.kext
AUDIO: Voodoo HDA, fully working
GA-P55M-UD2
Intel P55/ICH10
System Configuration:
CPU: Intel Core i7-860 @ 2.80 GHz
GPU: Zotac NVIDIA GTX 470 AMP! 1280 MB
RAM: Kingston HyperX 8 GB (4x2GB) DDR3 1333 MHz
OOD: Samsung SH-D163B DVD-ROM, SATA (AHCI mode)
Keyboard: Apple Keyboard, USB
Mouse: Apple Magic Mouse, USB-Bluetooth Dongle (DIGITUS DN-30200)
Component Status:
Install Method: from Partition ()
Bootloader: Chameleon 2.0 RC5 r1238
Kext (all used Kexts from MultiBeast 3.8.0):
NullCPUPowerManagement
EvOreboot (Shutdown/Restart)
USB: IOUSBFamily Rollback
Disk: IOAHCIBlockStorageInjector
Audio (Realtek ALC888B): ALC8xxHDA, AppleHDA Rollback, ALC887/888b Enabler
Ethernet (Realtek RTL8111D): Lnx2Mac's RealtekRTL81xx Ethernet (edit in /Extra/org.chameleon.Boot.plist: EthernetBuiltIn=Yes (for App Store verify))
Graphics: edit in /Extra/org.chameleon.Boot.plist: Kernel Flags: npci=0x2000 PCIRootUID=1; GraphicsEnabler=Y
by netkas (using HexEdit)
All works great, except sleep
GA-P55A-UD4P
Intel P55/ICH10
System Configuration:
CPU: Intel Core i5-760 @ 3.80 GHz OC Lynnfield
GPU: ASUS nVidia GTX 550 Ti! 1536 MB
RAM: GSkill Ripjaws X Series 8 GB (2x4GB) DDR3 1866 MHz
OOD: Samsung SH-D163B DVD-ROM, SATA (AHCI mode)
Keyboard: Logitech S520, USB
Mouse: Cyborg RAT3, USB
Component Status:
Install Method: from Partition ()
Bootloader: Chameleon 2.0 RC5 r1238
Kext (all used Kexts from MultiBeast 3.8.0):
NullCPUPowerManagement
USB: IOUSBFamily Rollback
Disk: IOAHCIBlockStorageInjector
Audio (Realtek ALC889): Modded AppleHDA for ALC889 Lion
Ethernet : Lnx2Mac's RealtekRTL81xx Ethernet (edit in /Extra/org.chameleon.Boot.plist: EthernetBuiltIn: Yes (for App Store verify))
Graphics: edit in /S/L/E NVDAGF100Hal.kext add dev id 0x124410de&0xffc0ffff and ATY_init in S/L/E
GA-Z68XP-UD3
System Configuration:
CPU: Intel Core i5-2500K @ 3.29 GHz
GPU: MSI nVidia GTX 460 768 MB
RAM: Kingston (KVR / 4G) 8 GB (2x4GB) DDR3 1333 MHz
OOD: PIONEER BD-RW
BDR-206, SATA (AHCI mode)
Keyboard: USB
Mouse: USB
Component Status:
Install Method: Iatkos L1
Bootloader: Chameleon 2.0 RC5 r1238
DSDT GA-Z68XP-UD3-F6
Audio (Realtek ALC889): Modded AppleHDA for ALC889 Lion
Ethernet : RTGNICv2.0.6.mpkg
Graphics: NVDAGF100Hal.kext, GeForceGLDriver.bundle, AppleGraphicsPowerManagement.kext
Components:
Intel Core Duo EGhz
Sata HDD's x 4 x 2TB
IDE 750GB HDD x 2
8GB (2x4GB) 1066 MHz DD3
Nvidia GT430 1GB
Asus DVD-RW
Logitech Webcam C905
Generic Chinese Bluetooth usb dongle
TP-Link WN551G PCI WIFI CARD
Apple USB Keyboard
Magic Trackpad and Mouse
Some Minor Issues I
Could not log into Mac App Store fixed by adding ethernet string for the MB's onboard Ethernet to com.apple.boot.plist in Extra folder
Airdrop does not work with the pci wifi card but otherwise no problems
Installed Lion Retail via guide and then made some modifications for this board
full guide for this board working 100% is available at
Components:
Intel Core2Quad Q8300
Corsair 60GB SSD
Corsair DDR2 800MHz
ATI HD4670 GPU
Pioneer DVD-RW
All included in Package:
fakesmc.kext
JMicronATA.kext
alc888b.kext
Components:
Intel Core2Quad Q8400
OCZ Vertex2 60GB SSD
Corsair DDR2 800MHz
Nvidia 9500GT GPU
Pioneer DVD-RW
All included in Package:
fakesmc.kext
JMicronATA.kext
alc888b.kext
GA-G31M-ES2L rev 2.4
Intel G31/ICH7
Full Retail install with Lion DVD-GM(11A511)
Used Hackboot-v6.2 to boot at first, after initial install reboot with Hackboot do usual formalities once in Lion environment, used DSDT Auto-Patcher to create a dsdt.aml * used Multibeast 3.7.3, did install with dsdt support (nothing else checked)
this worked for HDD boot and my Video card NVidia GS-e4-0x10de) full QE-CI 1080P all resolutions unlocked via DVI-HDMI
Audio installed with AzaliaAudio.pkg
Network installed with Kext Wizard (used AtherosL1cEthernet.kext)
Asus Bluetooth USB-BT21 Dongle working OOB
wireless card Asus WL-138g V2 PCI fully functional OOB
Hackboot-v6.2, Multibeast 3.7.3, Kext Wizard, FakeSMC.kext and AtherosL1cEthernet.kext (in System/Library/Extensions)
GA-X58A-UD3R rev 1.0
Install Method:
I used the Mac Pro 4,1 extra zip under the post install section, others may work too.
Component Status:
Sound not working (yet)
Ethernet working (used RealtekRTL81xx then showed up for me as Bluetooth PAN)
USB3/Gsata not tested.
Included in the Mac Pro 4,1 extra, but some may not be needed:
FakeSMC.kext
AHCIPortInjector.kext
IOACHIBlockStorageInjector.kext
Not Include and needed:
GA-X58A-USB3 rev 1.0
X58/ICH10R
Install Method: Kakewalk 4.0 for Gigabyte Motherboards with GA-X58A-UD3R rev 1.0 drivers option
Component Status:
BIOS Ver. F3
Sound working
Ethernet working
USB3/Gsata not tested.
GeForce GT 240 512 MB working
8GB RAM (4x2GB) Kingston .A03LF
SONY BDRW BWU-300S working
1 TB WDC WD10EARS-00Y5B1 Hard Disk
Not Include and needed:
Audio kext
GA-G31M-ES2L rev 2.4
Intel G31/ICH7
System Configuration:
Intel Pentium Dual Core E5800 @ 3.20 GHz
8 GB (2x4GB) G.Skill DDR2 PC6400 RAM
64 GB Kingston SSDNow V100 SSD
EVGA GTX 460 1 GB SC GDDR5 1 GB PCI-e Graphics Card
TP-Link TP-3269 Gigabit Ethernet
DWA-556 Xtreme N Wireless PCI-e Card
AZiO USB 2.0 Bluetooth 2.1 Adapter
OS X 10.7 Lion GM ()
For all working specs, please visit
For my build site, please visit
GA-P31-DS3L
Intel P31+ICH7
Core2Duo Processor
Build 11A511
Working fine with Chameleon RC5 (rAndy)
8169 Eth. works, with 8169 kext from Snow Leo
ALC888 works fully, with an old AppleHDA.kext (Snow Leo)
FakeSMC, custom , ALC888
GA-P35-DS4
Intel P35+ICH9
Core2Duo E8400 Processor
NVidia Palit 9400GT 512MB
4GB RAM DDR2
Build 11A511
Works perfect with this GA-P35-DS4-specific
GraphicsEnabler=Y, no injectors
FakeSMC, DSDT gets created during install
GA-P35-DS3
Intel P35+ICH9
Core2Quad Q8400 Processor
ATI Asus HDMB
2GB RAM DDR2
Build 11A511
Works perfect with the GA-P35-DS4-specific
GraphicsEnabler=N, no injectors
FakeSMC, DSDT gets created during install
GA-P35C-DS3R Rev 1.1
Intel P35+ICH9R
Core2Quad Q9400 Processor
NVidia Gigabyte 9800GT 1024MB
8GB RAM DDR2
Build 11A511
Install Method: tonymacx86 xMove + MultiBeast upgrade from 10.6.8
All works except sleep
GraphicsEnabler=Y, no injectors
MultiBeast with Custom DSDT
Audio enabled using ALC8xxHDA and AppleHDA Rollback
Ethernet enabled using official Realtek 2.0.6 drivers
GA-P35C-DS3R Rev 2.0
Intel P35+ICH9R
Core2Quad Q6600 Processor
NVidia Leadtek 8800GTS 512MB
4GB RAM DDR2
Build 11A511
Works perfect with this GA-P35-DS4-specific
GraphicsEnabler=Y, no injectors
FakeSMC, DSDT gets created during install
ApplePS2Controller.kext and AppleACPIPS2Nub.kext to make PS/2 keyboard working
GA-Z68X-UD3-B3 (rev 1.0)
Intel Z68+ICH10
Core i5 2500k Processor
Nvidia Geforce 460 GTX 1Gb (OC)
2x4GB RAM DDR3 1333Mhz
Build 11A511
Install Method: MaLd0n's USB stick method with Chameleon RC5 (smbios = Mac3,1), remove IOFirewireFamily otherwise KP in booting.
All works (USB 3.0 not tested), cinebench OpenGL = 39.5fps
GraphicsEnabler=Yes, EthernetBuiltin=Yes (otherwise App Store won't work), Kernel flag: add npci=0x2000, no injectors
DSDT generated by MaLd0n's DSDT Auto-Patcher (for Z68 version)
Audio enabled using ALC8xxHDA + AppleHDA Rollback + ALC889 in MultiBeast
Ethernet enabled using official Realtek 2.0.6 drivers
GA-Z68X-UD4-B3 (rev 1.0) F8 Bios
Intel Z68+ICH10
Core i7 2600k Processor @ 4.0 GHz (only multiplier changed to 40)
CoolMaster Hyper N520 CPU Cooler
4x4GB Corsair RAM DDR3 1333Mhz
Default Bios setting, HPET changed to 64 bits, all Sata controllers changed to AHCI, CPU multiplier changed to 40, no changing in voltages, SMART enabled, CPU temp and fan alarm enabled
PowerColor ATI Radeon HD 4850 1G DDR3: ATI 48xx Patch for 10.7.1 from Multibeast 4.0.2
On-board Giga Ethernet: Lnx2Mac's RealtekRTL81xx 0.90 install package downloaded from developer's website
On-board sound: ALC8xxHDA.kext and AppleHDA.kext rollback
On-board F OOB
On-board ICH10 Sata: all working OOB (5 HDs)
On-Board Marvell Sata controller: working without JMicron kext, but the drives connected to this controller are old and both are being recognized as IDE by the Bios, so not fully tested
On-board eSata: OOB
On-board USB 2: OOB
On-board USB 3: Multibeast NEC/Renesas and E drive only recognized if attached after system is up, if attached before boot needs reconnection
TP-Link TG-3269 (RTL8169SC chipset) PCI Giga Ethernet card: vanilla AppleRTL8169Ethernet.kext copied from a 10.6.8 IONetworkingFamily.kext/Contents/Plugins to the same place in original 10.7.1 kext
TP-Link WN851N (AR5416 chipset) PCI a/b/g/n Wireless card not working: 10.7.1 interface shows fine, AirDrop shows in Finder, but connection attempts cause infant freeze (not panic); clicking AirPort icon in toolbar causes instant panic
Install Method: Kakewalk 4.1.0 choosing GA-Z68X-U3H-B3 mobo and replacing DSDT file in the USB stick Extra folder with one downloaded from tonymacx86's DSDT Database
GraphicsEnabler=No, even to install: this particular mobo+ATI card combination were hanging during boot.
EthernetBuiltin=No (App Store not tested), Kernel flag npci=0x2000 (automatically added by Kakewalk)
E/E/FakeSMC, E/E/ElliottForceLegacyRTC (to prevent CMOS reset), ALC8xxHDA.kext and S/L/E/AppleHDA.kext rollback, all installed by Kakewalk along with NullCPUPowerManagement and JMicron kexts. Last both deleted after install.
Audio was enabled after install, but 10.7.1 update disabled it. Both, reinstalling Kakewalk or copying S/L/E/AppleHDA.kext (rolled back version) from backup, restored sound
/Library/Preferences/
SystemPreferences/NetworkInterfaces.plist edited to change BSD interface names order (en0, en1, en2)
GA-EP45-DS3R
Intel P45+ICH10R
Core2Quad Q6600 Processor
nVidia Geforce GTX260 896 MB
8GB RAM DDR2 (1066 MHZ)
Build 11A511
Install Method: MaLd0n's USB stick method with Chameleon RC5
GraphicsEnabler=N, DSDT Edited
DSDT generated by MaLd0n's DSDT Auto-Patcher
Audio enabled using ALC899a.kext + Patched AppleHDA.kext
Ethernet enabled using Lnx2Mac's Realtek RTL81xx Driver
GA-H67MA-USB3-B3
Core i5 2500 Processor
nVidia Geforce 9400GT 1 GB
2 X 2GB RAM DDR3 (1333 MHZ)
Build 11A511
Install Method: Tonymac's XMove + Multibeast
Graphics Enabler=Yes, No DSDT
*Multibeast with Easybeast
Audio enabled by checking Apple8XXHDA, AppleHDA rollback and ALC889 in Multibeast
Ethernet enabled by checking Realtek Gigabit Ethernet in Multibeast
Graphics by NVEnabler.kext
USB3.0 working
Voodoo ps/2 Controller kext not working
GA-H67N-USB3-B3 (F5 BIOS revision)
Intel H67 /intel HD 3000 onboard
System Configuration:
Core i5 2500K Processor
intel HD 300 onboard with HDMI audio
2 X 4GB RAM DDR3 (1333 MHZ) G.Skill sniper
Wd Caviar Green 1Tb
Gigabyte SATA3 working fine
Sony Blu-ray BD-5300S
Case slimDesktop 400w
OSX Lion 10.7.1
GeekBench 2.20 score 9.625
* Install Method: OS X 10.7 Lion GM ()
Graphics Enabler=Yes, EthernetBuiltin=Yes, DSDT from Tonymac's, MacBook Pro 8.1 smbios.plist, Chameleon 2.1 rc1650
ALC889, RealtekRTL81xx, DSDT patching for HDMI audio
Audio enabled by checking Apple8XXHDA, AppleHDA rollback and ALC889 in TonyMacX86'sMultibeast ()
Network RealtekRTL81xx beta ()
Graphics QE/CI OOB
USB3.0 working with TonyMacX86'sMultibeast
by PippoX0
GA-H67A-UD3H-B3 (F6 BIOS revision)
Install Snow Leopard using
Update to 10.6.8 using
(update causes KP without UpdateHelper.
Run MultiBeast for DSDT ONLY, run UpdateHelper, reboot, run 10.6.8 Combo Updater, run MultiBeast again (DSDT ONLY), reboot, install LAN and audio kexts with MultiBeast)
If using Intel HD 2000 video (integrated into CPU), screen is black after 10.6.8 update reboot.
Shutdown system after update, install 3rd party video card, turn system back on.
HD 2000 is incompatible with SL.
According to
it works on Lion (after removing a kext).
Install Lion using
ALC889, RealtekRTL81xx
GA-G31M-ES2L
bios F10 rev 1.0
Intel G31+ ICH7
Pentium E5200 Processor (OOB) by my SSDT or with "GeneratePStates=Yes" and "GenerateCstates=Yes" at org.Chameleon.Boot.plist in Extra
nVidia MSI Geforce 240GT 1 GB DDR3 (OOB) enabled by "GraphicEnabler=Yes" at org.Chameleon.Boot.plist in Extra
2 X 2GB RAM DDR2 (800 MHZ)
Mouse and Keyboard is USB
Build 11A511
Install Method: Install from USB FlashDrive (which restored from InstallESD.dmg) with after installed Cameleon RC5 and fakeSMC+DSDT+Smbios in Extra. After OS install, loading from FlashDrive, installing Chameleon on system disk, DSDT and Smbios at
Extra and fakeSMC at S/L/E
Use Kernel Flag "npci=0x2000" to avoid frizz on "PCI configuration beginning" and "UseKernelCache=Yes"
at org.Chameleon.Boot.plist in Extra for faster loading.
DSDT (ALC883+ all issues fixes)
Chameleon2 RC5 build 1203
without Processor and Video sections
with temp sensors controllers
Audio (ALC883) enabled by DSDT and
Ethernet (Realtek8111) enabled by EthernetBuildIn=Yes at org.chameleon.Boot.plist in Extra
Sleep, Restart, SpeedStep all works
GA-EP43-UD3L
Intel P43+ICH10
Core2Duo E6300 Processor
NVidia Gigabyte 8400GS 512MB
4GB Kingstom RAM DDR2@800Mhz
Dell USB Keyboard + Apple Magic Trackpad
Install Method: tonymacx86 xMove + MultiBeast with fresh installation
All works except HDMI audio
MultiBeast with Custom DSDT
Using GraphicsEnabler=Yes
Audio enabled using ALC8xxHDA and AppleHDA Rollback
GA-P67A-UD4-B3
CPU: Intel 2600k
Graphics: Sapphire Radeon HD 6870 Fully recognized with QE/CI working
Sound working
Sleep Mode working
USB 3 working in full speed
Installed by 10.6.0 Retail DVD
Installed Update Helper
Updated with 10.6.8 Combo Update
Installation & hardware recognition by iBoot + Multibeast 3.8.0
Downloaded GA-P67-UD4-b3 DSDT from tonymac
Upgraded Lion with xMove method
Sound: AppleHDA Rollback, ALC8xxHDA
Ethernet: Realtek Gigabit Ethernet 2.0.6
FakeSMC Plugins
USB 3.0 - NEC/Renesas
Included in MultiBeast.
Guarantee one of most recommended parts for hackintosh build in 2011. Everything just works effortlessly from installation, 64bit, audio, ethernet, graphics with QE/CI & multiple display (OOB), sleep mode just works from the moment after running MultiBeast. You can see '' for more information.
Core I7 930
EVGA NVIDIA GEFORCE GTX 275 896 MB RAM
INSTALLED WITH KAKEWALK FOR LION AND THEN Updated with 10.7.1 Combo Update
gaphics worked out of the box full resolution and everything else.
ethernet worked with: Lnx2Mac's realtek81x driver in multibeast 3.8.0
Sound working
Ethernet: Ran multibeast to install Realtek gigabit network kext
Sound: VoodooHDA, ALC8xxHDA - think some of the jack colours are mixed up, but they work
GA-EP41-UD3L
Intel G41 / ICH7 Chipset
Install method IAtkos L1 DVD
CPU: quad core q9550
Graphics: NVIDIA 8400gs 256MB Fully recognized with QE/CI working
Sound works with alc8xx.kext and hdae888.kext
Sleep Mode not working
Updated to 10.7.2 via online Software Update
used tutorial -
Hardware Name
Patches Used
32/64bit working with patches
System Configuration:
BIOS: 5561
CPU: Intel Core i7 3.4GHz
GPU: ATI Radeon MB, XFX (miniDP not tested yet).
RAM: 3 x 2GB Kingston DDR3 1333MHz
OOD: Kingston 128GB SATA2 SSD
Keyboard: Apple Aluminium Keyboard
Mouse: Apple Magic Mouse, noname BT dongle
Component Status:
Everything works including SSD T video OOB, sleep without any sleepenabler.
Install Method: Multibeast 3.8
Update with 10.7.1 Combo Update
Bootloader: Chameleon 2.0 RC5 with graphicsenabler=yes
MultiBeast 3.8.0, including:
DSDT Auto Patcher
voodohda 0.2.1
hnak's AppleIntelE1000e Ethernet
Voodohda not working after wake-up, torn sound. Will try kext upgrade.
DSDT Auto Patcher
System Configuration:
BIOS: 0118
CPU: Intel Core2 Quad Q6660
GPU: Onboard GMA3500 won't work - nVidia XFX GTS250 1GB
RAM: 2 x 2GB OCZ Reaper HPC DDRII 800MHz
OOD: 2x 500GB Hitachi SATAII
Keyboard: Apple Aluminium Keyboard
Mouse: Apple Magic Mouse,
Component Status:
Everything works
Install Method: DVD Install Lion
Update with 10.7.1 Combo Update
Bootloader: Chameleon 2.1 RC5 rev1554
DSDT Auto Patcher
voodohda 2.7.3
Intel5266mm Ethernet
Firewire OOB
Intel G41 (ICH7)
System Configuration:
BIOS: Downgraded November 06,2009
CPU: Intel E7500 core 2 Duo 2.93GHz
MotherBoard: Intel DG41RQ
GPU: ASUS GeForce 210 1GB DDR3 - works OOB (QE/CI)
RAM: DDR2 800Mhz 2GBx2
DVD: LG DVD-RW SATA
HDD: WD 500GBx2 SATA
Monitor 19" LCD: VGA
Keyboard:PS/2
Mouse:PS/2
onboard Ethernet - works
onboard Audio - works
Component Status:
Install Method: clean install onto a NEW Partition, xMove+Multibeast
Update with 10.7.1 Combo Update
MultiBeast with Custom DSDT
DSDT generated by MaLd0n's DSDT Auto-Patcher
Without DSDT - Just check
System Utilities
ElliottForceLegacyRTC
NullCPUPowerManagement
Chimera v1.5.4 r1394
32-bit Apple Boot Screen
MacPro3,1 smbios.plist
tonymacx86 Remixed theme
OSx86 Software.
VoodooHDA 0.2.6.1 (32 bit only)
Lnx2Mac's Realtek RTL81xx Driver
Voodoops2controller (32 bit only)
Sleep & Wakeup - Works perfectly, no need to install SleepEnable.kext
BIOS SETUP - 1. Load default on BIOS, 2.Setup drive mode Legacy and SATA only, 3.Boot-&UEFI-&Enable
I have dual boot windows and LION on GPT, windows7 was already installed
Sound, LAN, Graphics Perfectly working Just multibeast it.
PCI Configuration begin -
10.6.7 AppleACPIPlatform IOPCIFamily kexts in S/L/E
Monitor 19": VGA Fixed to Hz Using ConfigX
Intel core i3 2100 ok
8gb ddr3 1333 - to install use 4gb ram
radeon hd4850 sapphire 512mb - ok dual display
network intel 82579v
realtek alc892
usb 3.0 nec/renesas
fw400 - native
iBoot 3.1.1 with PCIRootUID=1 -x thanks to user raketa
installed with Multibeast 3.8.0 UserDSDT and Dsdt.aml from DSDT fixer
UserDSDT Install
alc8xxhda, alchdaRoolBack and alc892 enabler non-dsdt
ati hd48xx injector, ati hd48xx patch 10.6.8
usb 3.0 nec/renesas patch
hnak?s AppleIntele1000 Ethernet
NullCPUPowerManagement.kext
Intel D945 ICH7
Intel E6600 Core2 Duo - 2GB + 2GB DDR2 - GMA950 - AHCI Mode SATA
Install Method: Retail Disk Image install on Hackintosh or Mac - Mac OS X 10.7 (11A511) - Chameleon 2.0 RC5 r1171
GMA950 - Works "Dual Display "
Ethernet - works
10.4 - 10.7 compatible "based on development-platform motherboard"
Software update works from 10.7.0 - 10.7.1
org.chameleon.Boot.plist
fakesmc.kext
RealtekRTL81xx.kext
IONetworkingFamily.kext
Hardware Name
Patches Used
Compatible 32/64bit
Pavilion G3333l
Make Lion iATKOS ML 2 Installer with USB Flash installer and ML2_Bootloader_Installer.pkg
Motherboard Setting: Drives Controller set to: AHCI
Processor Intel Dual Core
Onboard Lan with official Realtek driver RTL8169
Sound using VoodoHDA.kext
Graphics Driver Standard GPU Mac (not specific for 82G33/G31 Express Graphics Controller)
Combo update :
Hardware Name
32/64bit working with patches
Z68A-GD80-G3
Make Lion Installer with xMove + Multibeast + delete TyMCE kext from installer
Motherboard Setting: Drives Controller set to: AHCI, Virtu set to disable (d-Mode will not boot osx eventhough lion already installed, haven't tried i-Mode)
Kext Used: FakeSMC , LegacyRTC, NullCPUpowerManagement, Audiokexts from Multibeast (ALCxxx + HDA rollback + 892 Enabler) + System Definition of MacPro 5,1
Core i5 2500K @4GHz (still detected @3.3GHz)
Sparkle GTX460 1GB (Havent tested sound over HDMI)
Seagate 500GB sata3 + other disks
Samsung DVD-RW
Onboard Lan with official Realtek driver, network & advance & hardware & configure manually& MTU & 8982 (no problem so far except its as if both LAN was used)
Sound using ALCxxx + HDA rollback + 892 Enabler
Updated n Running Lion 10.7.1 (might need to reinstall kexts)
Intel P45 Chipset
Intel ICH10 Chipset
Intel C2D E8500 *OC at 1600FBS
4GB DDR2 1066 - [ P I ] F2-GBPI
Radeon hd5570 1gb - H557F1G
Network Realtek 8111C.
Realtek ALC888
(2.0 Ok) (5.1 NG)
Bios settings:
RAID Mode (AHCI)
ACPI Standby State (S3)
Method: Install with iATKOS_L1
BootLoader Options
Graphics Enabler (NO)
Built-in Ethernet
Extra/Extension
Main Hardware
AHCI Sata Intel
JMicron IDE (Works Fine)
Voodoo 2.2 (AppleHDA ALC8xxx & ALC888 don't work)
Motherboard Sensors
Realtek RTL81XX
Please specify if your card is AGP, Integrated, PCI or PCI-E.
Also, place chip and board manufacturer in their respective column.
Card-Manufacturer
Working Output
Dual Display
32/64bit working
Radeon HD 4850
Needed "Legacy4800Controller.kext" in the E/E. Occasional glitches (static on screen for a few seconds) when returning from sleep.GraphicsEnabler=Yes
Radeon HD 4850
10.7.1 hd4800 patch from Netkas
Radeon HD 5450
Simply moved ATI5000injector.kext into E/E and reboot
Radeon HD 5670
GraphicsEnabler=Yes
DVI, HDMI, DisplayPort
Radeon HD 5770
*boot with framebuffer=vervet, GraphicsEnabler=Yes
Radeon HD 5770
PowerColor
works without any injector
VGA/DVI/HDMI
Radeon HD 5770
Works OOB with GraphicsEnabler=Yes
2x DVI/HDMI
Card-Manufacturer
Working Output
Dual Display
32/64bit working
256 or 512MB
Works with GraphicsEnabler=y
Works with GraphicsEnabler=y
Works with GraphicsEnabler=y
ASUS EN8800GTS 512 G92
works full qe/ci with these
. Install the kexts with the program provided.If doesn't work try changing the device id in the info.plist of the kext with your own(you can find it in system profiler)
Works perfectly out of the box.
Point of View
Works perfect out of the box.
Works OOB with GraphicsEnabler=Yes
VGA/DVI/HDMI/Display Port
Works with GraphicsEnabler=y
Works oob but listed as GTS250, NVenabler works perfectly
Works perfect with kext from multibeast.
Works OOB with GraphicsEnabler=Yes
VGA/DVI/HDMI
GeForce GT220
works OOB with GraphicsEnabler=Yes
DVI/HDMI/VGA
GTS 250 OC TwinFrozr
works OOB with GraphicsEnabler=Yes
works with latest CUDA and
do stop [ PCI Configuration Begin ]
works with nvidia drivers for Quadro Mac
DVI/VGA/HDMI
added device id to NVDAGF100hal.kext, GraphicsEnabler=Yes
GraphicsEnabler=Yes & npci=0x2000
(HDMI/DVD-I not tested)
GTX 460 SC
works with GraphicsEnabler=Yes & npci=0x2000
works with nvidia drivers for Quadro Mac
GTX 560 ti
added device id to NVDAGF100hal.kext, installed ATY_init.kext, GraphicsEnabler=Yes, npci=0x2000
DVI/DVI/mHDMI
Manufacturer
32/64bit working with patch
Download Installer from
Add the italics text below your boot.plist to stop an App Store verification error.
&key&EthernetBuiltIn&/key&
&string&Yes&/string&
Install Official 10.6 driver restart then plugin the USB adapter. I installed twice, the 1st did not work. Now i'm happy again! :D
802.11n 300Mbps
Works as native Airport Extreme card.
Only need to edit IO80211Family.kext in S/L/E/IO80211Family.kext/Contents/PlugIns/AirPortAtheros21.kext/Contents/Info.plist/ add: &string&pci168c,29&/string& !!! Not working. System freezes with i3, i5 i7 !!!
Download 10.6 Installer from
D-Link DWL-G520 revB
AtherosFix - id: pci168c,13
Atheros AR9280 (AR5BXB92) (AR5009)
Toshiba/Atheros
This is a Toshiba branded Mini PCI-E card with a Mini PCI-E to PCI-E adapter. Immediately and automatically detected as an AirPort Extreme card, no kexts, edits or fixes needed. Working extremely well with 10.7.1, 32/64-bit, Core i5.
BCM94322MC
Apple Inc.
This is an Apple branded Mini PCI-E card with a Mini PCI-E to PCI-E adapter. Immediately and automatically detected as an AirPort Extreme card (Broadcom BCM43xx), no kexts, edits or fixes needed. Working extremely well with 10.7.1, 32/64-bit, Core i5. Guide can be found at
TP-Link TL-WN851N
Atheros AR5416
IO80211Family.kext, required in /S/L/E. !!! No. It doesn't work ! CAUTION: KP with i5 and i7 processors!
Manufacturer
32/64bit working with patch
10/100/1000
Add the missing/removed vanilla S/L/E/IONetworkingFamily.kext/
Contents/Plugins/AppleRTL8169Ethernet.kext, from a 10.6.8 installation, to the same place in the 10.7.1 vanilla IONetworkingFamily.kext. No mods, it just works.
Hardware Name
Manufacturer
32/64bit working with patch
Type of Accessory
Item Description
Manufacturer
32/64bit working with patch
USB DVB-T TV Tuner
Terratec Cinergy T USB XXS
Works without any problems. Plug n play
USB Logitech HD C310
720p WebCam + 5Mpx shoot
Works OOB without any problems. Plug n play
This page was last modified on 22 April 2013, at 08:13.
This page has been accessed 261,108 times.
& 2015 OSx86 Project&&|&&